−27%
Palmetto State Armory
Glock 19 Gen5 MOS
$549.99
$399.99
View at retailer
8mm Mauser
Ballistics (Typical Factory Load)
2,700
Muzzle Velocity
fps
2,902
Muzzle Energy
ft-lbs
181
Typical Bullet
grains
8.22
Bullet Diameter
mm
35,000
Max Pressure
PSI
57.0
Case Length
mm
Handloading Data
Reference load data for experienced reloaders. Always start at the start charge and work up. Consult official manuals before loading.
| Bullet | Powder | Start | Max | Velocity | COAL | Source |
|---|---|---|---|---|---|---|
| 150 gr (9.7 g) SPBT | Hodgdon H4895 | 44.0 gr 2.85 g |
48.5 gr 3.14 g |
2,800 fps | 3.250 | Hodgdon |
| 170 gr (11.0 g) SPBT | Hodgdon Varget | 44.0 gr 2.85 g |
48.0 gr 3.11 g |
2,650 fps | 3.250 | Hodgdon |
| 170 gr (11.0 g) SPBT | IMR 4064 | 43.0 gr 2.79 g |
47.0 gr 3.05 g |
2,620 fps | 3.250 | IMR |
| 196 gr (12.7 g) SPBT | Hodgdon H4350 | 48.0 gr 3.11 g |
52.5 gr 3.4 g |
2,500 fps | 3.250 | Hodgdon |
| 196 gr (12.7 g) SPBT | Alliant Reloder 19 | 48.0 gr 3.11 g |
52.0 gr 3.37 g |
2,520 fps | 3.250 | Alliant |
| 220 gr (14.3 g) SPBT | Hodgdon H4831 | 48.0 gr 3.11 g |
52.0 gr 3.37 g |
2,400 fps | 3.250 | Hodgdon |
Measurement Guide for Reloaders
Powder Charge
Measured in grains (1 grain ≈ 0.065 grams) using precision digital or mechanical scales. Maintaining strict powder weight is crucial for safety and velocity consistency.
Cartridge Overall Length (COAL)
Total length from case base to bullet tip. Checked with digital calipers. Must be within manufacturer's specified range to fit and feed from your firearm's magazine.
Cartridge Base to Ogive (CBTO)
Precision shooters measure to the ogive — the curved part of the bullet that first contacts the rifling — for more accurate bullet seating depth and consistency.
Case Length & Headspace
Brass stretches with firing. Measure case length to know when to trim. Use headspace comparators to check shoulder bump-back during sizing.
Neck Tension
The grip the brass has on the bullet. Measured with ball micrometers by comparing neck wall thickness before and after bullet seating.
Pressure Signs
Inspect fired brass for over-pressure: flattened primers, ejector marks, case head expansion. If unsure, reduce charge and consult your load manual.
Always consult established reloading manuals (Hodgdon, Hornady, Lyman) for your specific bullet and powder combinations. For experienced reloaders only.
Loading your own? Handloading data for every cartridge we cover
Technical Specifications
| Bullet Diameter | 8.22 mm |
| Case Length | 57.0 mm |
| Max Chamber Pressure | 35,000 PSI |
| Type | Rifle |
Compatible Firearms (0)
No firearms found for this caliber.